New

Free 30-minute consultation with a founding director — taxation, accounting, corporate, HR and IT advisory.

Book now

Sales Tax & E-invoicing

Steel Melters and Re-Rollers: Sales Tax per Unit of Electricity and the STGO 34 List

Steel melters, re-rollers and composite units pay sales tax in advance through their electricity bills, at Rs 5 to Rs 35 per unit. On 12 November 2026 FBR added eight more units to the list that pays Rs 5.

Sales Tax & E-invoicingUpdated 19 November 20266 min read
On this page

Since 1 July 2026, steel melters, re-rollers and composite units pay sales tax through their electricity bills, at a fixed amount for every unit of electricity they consume. The rate depends mainly on the scrap they use. On 12 November 2026 FBR issued Sales Tax General Order (STGO) No. 34 of 2026, which adds eight more manufacturers to the list of units that pay the lowest rate, Rs 5 per unit.

In short: the per-unit tax is collected by the electricity distribution company (DISCO) and is an advance that the manufacturer adjusts against its output sales tax. Units that qualify for Rs 5 on imported or EFS scrap are named by FBR in a general order. STGO 34 adds serial numbers 40 to 47 to that list and applies to all electricity connections of those units with immediate effect.

The rates

The rules are in S.R.O. 1245(I)/2026 of 31 July 2026, as amended by S.R.O. 1664(I)/2026 and S.R.O. 1788(I)/2026.

Type of unitSales tax per unit of electricity
Melters and composite units using local scrapRs 30
Melters and composite units whose imported scrap is over 70% of the total in the last six monthsRs 5
Melters and composite units whose scrap bought directly from an Export Facilitation Scheme (EFS) licensee is over 70% in the last six monthsRs 5
Manufacturers running on captive power or self-generated electricityRs 35
Re-rollers making steel bars, on imported or local raw materialRs 30
Melters and composite units in the erstwhile FATA and PATA using local scrapRs 20, or Rs 5 where imported or EFS scrap is over 70% in the last six months
Re-rollers in the erstwhile FATA and PATARs 20

For a newly established unit, or a closed unit that restarts, eligibility for the Rs 5 rate is tested on quarterly imports or purchases.

How the scheme works

  • Advance tax, adjustable. The amount collected through the electricity bill is an advance. Melters, composite units and re-rollers adjust it against their output sales tax.
  • Melter or re-roller? A manufacturer that consumes 500,000 units or more a month on a single meter is treated as a melter or composite unit. Below that it is treated as a re-roller, unless FBR's production monitoring system shows that it is a melter or composite unit.
  • The connection keeps its category. Once an electricity connection is associated with a type of steel business, it stays the same despite a change in ownership or in the nature of the business, for example under a lease.
  • The Rs 5 list. Units that qualify for Rs 5 on imported or EFS scrap are notified by FBR in a general order, giving the name, NTN, electricity reference number and DISCO. FBR reviews the list every three months.
  • Integration. The Rs 5 rate is for melters and composite units that are integrated with FBR's computerised system for real-time reporting of sales. FBR will specify the date from which integration applies in a general order.
  • Default. If the tax is not paid by the due date on the electricity bill, the DISCO disconnects the connection of a melter or composite unit, in addition to any other legal action.

What STGO 34 adds

The Rs 5 list is in STGO No. 16 of 2026, dated 6 August 2026. STGO 34 adds eight units at serial numbers 40 to 47. Six are shown with their DISCO connections and two with self-generation. FBR says their eligibility was determined on the criteria in S.R.O. 1245: scrap and electricity consumed in making steel products, and scrap imported under the specified codes.

FBR, or the Commissioner Inland Revenue concerned, can examine any registered manufacturer for inclusion in or exclusion from the list. A manufacturer facing hardship can raise it with its Commissioner.

Minimum value of steel goods, and scrap from copper recyclers

Alongside the per-unit tax, FBR fixes a minimum value of supply for locally produced steel goods, on which sales tax is paid at the standard rate. The values are in S.R.O. 2402(I)/2025 of 10 December 2025, made under the first proviso to section 2(46) of the Sales Tax Act, 1990. They are inclusive of sales tax.

GoodsMinimum value
Steel bars and other long profilesThe average national retail price of steel bars, taken as the average of retail prices in Lahore, Karachi, Peshawar, Quetta, Rawalpindi and Islamabad that the Pakistan Bureau of Statistics publishes each month, minus Rs 1,500 per metric ton
Steel billets85% of the value for steel bars
Steel ingots or bala80% of the value for steel bars
Ship plates75% of the value for steel bars
Re-meltable iron and steel scrap (heading 72.04) supplied by a manufacturer-cum-exporter of recycled copper, authorised under the Export Facilitation Scheme, 2021, directly to a registered steel melter60% of the value for steel bars

The last entry is new. S.R.O. 1829(I)/2026 of 15 October 2026 added it at 55%, and S.R.O. 2086(I)/2026 of 5 November 2026 raised it to 60%.

Input tax: outside the section 8B cap until 31 December 2026

Steel melters, re-rollers and composite units paying sales tax under the provisos to section 6(2) are also excluded from the section 8B(1) limit on input tax adjustment. S.R.O. 1343(I)/2026 added them to Table-1 of S.R.O. 1190(I)/2019 until 30 September 2026, and S.R.O. 1789(I)/2026 extended this to 31 December 2026. See our note on the section 8B input tax cap.

Checklist

  • Check which rate your DISCO is applying on each connection, and whether your unit is on the STGO 16 list as amended
  • Keep six months of scrap purchase records, split between imported, EFS and local, to support the Rs 5 rate
  • If you qualify but are not listed, raise it with your Commissioner Inland Revenue with the supporting record
  • Claim the tax paid through electricity bills as an adjustment in the monthly sales tax return
  • Pay electricity bills by the due date to avoid disconnection
  • If you buy scrap from an Export Facilitation Scheme copper recycler, check that the invoice value is not below 60% of the steel bar value
  • Plan for the section 8B input tax cap from January 2027, unless FBR extends the exclusion beyond 31 December 2026
How Veridian can help: our sales tax practice checks which rate applies to your unit, prepares the case for inclusion in FBR's list, and reconciles the tax paid through electricity bills with your returns. Book a consultation.

Official sources

Frequently asked questions

How much sales tax do steel melters pay per unit of electricity?

Under S.R.O. 1245(I)/2026 as amended, melters and composite units using local scrap pay Rs 30 per unit, those whose imported or EFS scrap is over 70% in the last six months pay Rs 5, and manufacturers on captive power or self-generation pay Rs 35. Re-rollers pay Rs 30. Units in the erstwhile FATA and PATA pay Rs 20.

What did STGO 34 of 2026 change?

It added eight more steel manufacturers, at serial numbers 40 to 47, to the list in STGO 16 of 2026 of units that pay sales tax at Rs 5 per unit of electricity. It applies to all their electricity connections with immediate effect from 12 November 2026.

Is the per-unit electricity sales tax a final tax?

No. S.R.O. 1664(I)/2026 states that it is advance in nature. Steel melters, composite units and re-rollers adjust it against their output sales tax.

Veridian Partners — Knowledge BankWritten by the founding team of Veridian Partners as part of our technical publication programme. Questions about this guide? Contact us.

This guide is general information based on the law as we understand it on the date shown, not advice for your situation. Tax rules change often — please speak to us before acting on it. See our disclaimer.

Free first consultation

Let's make compliance the easy part of your business.

Tell us what you need. We aim to reply within two business days, and the first consultation is free.

Chat with us